SIKO Wire-actuaded Encoders SG62

Measurement Range	0 ... 6000 mm
Housing	Aluminum/Plastics
Operating Voltage	10 ... 30 V DC
Output Current	Redundant 2x 4 … 20 mA, 2x Potentiometer
Weight	0.8 kg
Measured Distance / Rope Drum Revolution	200 mm
Protection Category	IP65
Ambient Temperature	-40 ... 80 ° C
Storage Temperature	±0.25 mm

Very robust wire-actuated encoder in compact design for numerous areas of application including crane construction, stage construction, warehousing technology, etc., up to a measuring length of 6000 mm, with signal output in redundant design.

Robust design
Measuring lengths up to 6000 mm
Analogue signal output in redundant design (2x 4…20 mA or potentiometer)
Very robust measuring rope (stainless steel)
IP65 protection category
M12 plug connection

Mechanical data

Feature	Technical data	Additional information
Housing	aluminum/plastics
Wire design	ø0.54 mm	steel rope (stainless)
Extension force	≥8 N on the rope
Measured distance/ rope drum revolution	200 mm
Weight	~0.8 kg

Electrical data

Encoder potentiometer

Feature	Technical data	Additional information
Operating voltage	≤30 V DC	power dissipation on potentiometer <1 W
Power rating	2 W at 70 °C
Resistance	10 Ω
Resistance tolerance	±5 %
Standard terminal resistance	0.5 % or 1 Ω	the higher value always applies
Linearity tolerance	±0.25 %
Type of connection	M12 plug connector (A-coded)	8-pole, 1x pin

Transducer, power output

Feature	Technical data	Additional information
Operating voltage	10 … 30 V DC	with load impedance ≤500 Ω voltage between I+ and I-
Output current	4 … 20 mA (2x)	4/20mA 20/4mA
	20 … 4 mA (2x)	20/4mA 4/20mA
	4 ... 20 mA, 20 ... 4 mA	4/20mA 20/4mA
Type of connection	M12 plug connector (A-coded)	8-pole, 1x pin

Measurement transducers permit optimum adjustment of the output current and output voltage to the measuring range. The measurement transducer is pre-set at the works so that an output signal of 4 … 20 mA or 20 … 4 mA is available.